9
7 Check before starting
Inspection before starting
The following inspection before starting describes what to be checked before starting and
what to be checked after an ongoing use for four hours. We refer to the service section for
a more detailed instruction. In case of any error, do not use the Contractor mini dumper
until the error has been rectified.
Check the Contractor mini dumper thoroughly to locate any sign of any faults and
imperfections.
Check that all parts are there and that they function well.
Check the hydraulic oil level - and fill up if necessary.
Check the acid level of the batteries. The liquid shall cover the cells.
Each battery has 3 screw lids for inspection of the acid level (fig.1. pos.1)
Check the tyre pressure.
Start
Daily charging.
Connect 230V
The machine is inactive as long as the battery charger is active.
Charging of the machine is done by connecting the power connector to the machine
To Next Page
Loading...