Twinca e800 - Troubleshooting Common Issues; Problem Identification and Solutions; Service and Maintenance Procedures; Pre-Maintenance Safety Steps

12
9 Troubleshooting guide
Problem
Kind
Solution
Reduced capacity of
the battery.
Acid missing
Battery is worn.
Change
The dump bed does not
move normally.
Missing hydraulic oil
Fill up
10 Service and maintenance
Prior to service Always position the yellow safety fittings on the hydrauliccylinder.
( Fig2, pos1 )
Switch off the current to the machine. ( Fig 1, pos 1 )
Note
Even though the main switch is off there is still plenty of energy in the batteries!
Hydraulic oil
Change the hydraulic oil once a year. In case of any sign of leakage, switch off the
machine and contact your local dealer or Twinca A/S.
How to clean the machine
For cleaning - use only a brush and water.
Note Never clean the engine with a high-pressure cleaner or a hose. Use only a cloth or
air pressure for cleaning the engine
FIG.2
POS.1
POS.1
ON
OFF
FIG.1