Twinca e800 - Maintenance Schedule and Battery Care; Routine Maintenance Checklist; Battery Lifecycle and Charging

13
10 Service and maintenance
Routine maintenance
Daily
Every
20 hours
Every
50 hours
the hydraulic
cylinder
the hydraulic
cylinder
to be made
Greasing points for
tilting point to the
dump bec
to be made
Greasing points on
the steering
to be made
Check acid
in the batteries
to be made
Hydraulic oil
Change
once a year
Check tyre
pressure
to be made
Safety inspection
To be performed by
qualified person
once a year
Gearbox oil
Change
once a year
Battery
The machine comprises 4 units 6 V batteries
Contains lead / acid.
Giving in total a voltage level of 24 V
Position the machine in a ventilated room during charging.
The battery has a cycle of 800-1000 chargings.
If the battery discharges faster than normally it means that the battery should be replaced.
Replace all batteries at the same time.
Charging instructions:
Charge voltage level at 77°F / 25°C
System voltage
24V
Daily charging
29.6V