Twinca e800 - Parking Brake System; Safety Fitting Placement

6
4 Personal safety
Always mount safety fittings at the front on cylinder for the dump bed before working on
the engine, hydraulic devices and other kind of service of the machine.
How to position safety fittings when not in use. (fig.1, pos.1)
How to position safety fittings when in use. (fig.2, pos.1)
Parking brakes
The parking brake is released automatically during operation of the machine.
And is automatically activated when the machine stops.
The user only allowed to be in zone 1.
Because of the risk of being trapped, the user must
make sure that nobody is in zone 2 during operation.
FIG.1
POS.1
POS.1
FIG.3
FIG.5
FIG. 2