twintex TP-3010 - 1 Introduction; 2 Production Models

- 1 -
1. INTRODUCTION
TP Series regulated DC power supply are designed to provide the required in laboratory, university and
production lines.
The output voltage is continuously adjustable between 0 to rating voltage. The load current may have any
value from 0 to rating current. Voltage and Current are adjusted by means of a coarse and fine potentiometer.
Both outputs can accurately read on voltmeter and ammeter.
Both stability and ripple are extremely good to meet the requirements of modern circuit design. The unit can
be used as either constant voltage or current source. It has output ON/OFF, fixed DC 5V/1A output (optional),
digital LED display and overload protection circuits.
2. PRODUCTION MODELS
No. Model
Output
Voltage
Output
Current
Output
ON/OFF
Fixed
5V/1A
V/A
Preset
Weight
kg
1 TP-1303EC 0-30V 0-3A 4.5
2 TP-1305EC 0-30V 0-5A 5
3 TP-1603EC 0-60V 0-3A 5.5
4 TP-1303C 0-30V 0-3A
●
5
5 TP-1305C 0-30V 0-5A
●
5.5
6 TP-1603C 0-60V 0-3A
●
6
7 TP-1303 0-30V 0-3A
● ●
5
8 TP-1305 0-30V 0-5A
● ●
5.5
9 TP-1603 0-60V 0-3A
● ●
6
10 TP-3010 0-30V 0-10A
● ●
10
11 TP-6005 0-60V 0-5A
● ●
10
12 TP-3020 0-30V 0-20A
● ●
14
13 TP-6010 0-60V 0-10A
● ●
14