2
Installation and Operation Instructions
C210 Controller and C680RF thermostats
General:
The C210 Zone controller operates with new RF communication method which
saves lot Of time during installation.
The C210 controls up to 5 zones. (Rooms) + By-Pass.
Bypass will balance the air flow according to the load at they rooms.
The use of RF signals saves cables between each thermostat to the main
controller.
Air condition unit can be controlled via the BMS output which is a dry contact
one. NO or NC type.
The distance between the C210 controller to the any of the thermostat should
be no more then 100 Feet (30 Meters).
Immune for interferences from Mobile phones and other electromagnetic
interferences.
Specification:
Supply voltage 12 VAC +/- 20%
Consumption 400 mA max @ 12 VDC
Protection Circuitry Transient protection
Operating temperature range -10°C to +70°C
Storage temperature range: - 20ºC to +85ºC.
Operating humidity range: 5~90 % RH (Non condensation)
Wiring Connections Molex and RJ11 terminal.
Box dimensions:
W= 4.9” (125mm) H = 2” (52 mm) D = 3” (77 mm)
Weight: 93 g
Protection Class: IP30
Plastic parts ABS – UL94 (V5) none flammable.
Standards: EN60730-1
Universal ISM Band : 434MHz
Antenna: Helix internal Antenna for 434MHz.
To Next Page
Loading...