Need help?Do you have a question about the Two-Rock Studio Pro and is the answer not in the manual?
Adjusts high frequency response; provides boost when pulled out.
Adjusts mid-range response; provides boost when pulled out.
Adjusts bass response; acts as contour switch when pulled out.
Connect speaker cabinets; match impedance carefully.
Lists and diagrams the vacuum tube types used in the amplifier.
Procedure and warnings for adjusting vacuum tube bias settings.
General| Type | Tube Amplifier |
|---|---|
| Channels | 2 |
| Reverb | Yes |
| Tubes | 4x 12AX7 |
| Effects Loop | Yes |
| Wattage | 35W |
To Next Page
