Need help?Do you have a question about the Two-Rock Traditional Clean and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Reverb | Yes |
| Rectifier | Solid State |
| Effects Loop | Yes |
| Tubes | 4 x 12AX7 |
| Controls | Treble, Middle, Bass, Presence |
| Speaker Outputs | 4 Ohm, 8 Ohm, 16 Ohm |
Follow all instructions, heed warnings, and avoid hazardous conditions for safe operation.
Ensure proper cleaning, ventilation, accessory use, and power cord protection.
Unplug during storms, refer servicing to experts, and ensure complete disconnection.
Details Input Jack, Bright Switch, Treble, Mid Switch, Middle, Deep Switch, and Bass.
Explains Gain and Master controls for setting amplifier gain and output.
Describes Reverb Send/Return and Presence controls for effect and tone contour.
Details the Standby switch operation and the function of the Indicator Lamp.
Covers A/C Input, AC ON/OFF switch, and Fuse details.
Explains Speaker Output Jacks, Effects Loop Send/Return, and serial number location.
Lists fuse types and ratings for different voltage and wattage models.
Identifies preamp and power tubes and their functions within the amplifier.
Provides normal bias voltage settings for 50/100 Watt and 40 Watt amplifiers.
Details the step-by-step procedure for adjusting the amplifier's bias.
Provides phone number, address, contact email, and website for Two-Rock Amplifiers.
To Next Page
