twotrees SP-5 - Test & Adjust 检测与调整

TEST & ADJUST 检测与调整
1. Tighten the screws of the coupling to ensure
the overall linkage of the heating plate when
the coupling is twisted
联轴器内的螺丝扭紧，确保扭动联轴器时热床整体
联动
2. Adjust the height of z-axis limit switch
Z轴限位开关高度调节
3. Plug in the power and press the switch
插电源，按下开关
4. Language 语言 设置：
“Setting” → “Language”
点击“ 设置 ” → “ 语言 ”
5. Home 归零 ：
“Tools” → “Home” → click “All”
点击“工具” → “回零” → “全 部”
SP-521 TWOTREES