MM23772, Rev. B
86
4. Press once to add as a normal group or channel.
5. Press
twice to add as a Priority 2 group.
6. Press
three times to add as a Priority 1 group.
7. Press
to re-start scanning.
9.9.2 P7250 Scan Model
1. Press to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press
once to remove group or channel from the list.
4. Press
once to add as a normal group or channel.
5. Press
twice to add as a Priority 2 group.
6. Press
three times to add as a Priority 1 group.
7. Press
to re-start scanning.
9.10 NUISANCE DELETE (SYSTEM MODEL)
A channel can temporarily be deleted from the scan list if it is not the currently selected channel.
1. Turn Scan ON.
2. When the radio receives a call on the channel, press the
. The channel is removed from the scan
list until the radio is power cycled.
9.11 BACKLIGHT ON/OFF
1. Press to access the menu.
2. Press
or to scroll through menu until “BCKLGHT” appears.
3. Press
to select Backlight menu.
4. Press
or to toggle backlight ON and OFF.
5. Press
to select new backlight setting.
9.12 CONTRAST ADJUST
1. Press to access the menu.
2. Press
or to scroll through menu until “CONTRAST” appears.
3. Press
to select Contrast menu.
4. Press
or to adjust contrast setting from 1 - 4.
5. Press
to select new contrast setting.
To Next Page
Loading...