Tyco Vigilant MX1-Au - Page 2

Page ii 8 February 2019 LT0442 Issue 1.96
Cautions & Warnings
100V a.c. audio line wiring is defined as LV
Telecommunications circuits and is subject to the
Australian Standard AS/ACIF S009:2006.
Ensure that this wiring is appropriately separated
and insulated from LV power wiring, ELV and
other customer cabling such as detection and
control circuits.
The internal circuit cards may be damaged by
static electricity when handled. Ensure you are
wearing an earthed ESD strap when installing
the MX1 circuit cards.
Ensure all power is turned off when connecting/
disconnecting internal and field wiring as damage
may occur if wrong or partial connections are
made with power applied.
Document 29 July 2009 Issue 1.12 Sheet 123 updated
History: 10 Nov 2009 Issue 1.13 Sheet 147 updated
1 Feb 2011 Issue 1.20 Multi-MX loop changes.
Sheets 130, 148, 149 & 1982-88 added. Sheets 103, 116, 121, 124,128,
140-144 revised. Sheet 146 deleted
13 June 2011 Issue 1.30 Sheet 149 updated
16 Nov 2011 Issue 1.40 Sheets 128, 143, 145, 148 amended
30 May 2012 Issue 1.50 Sheet 147 and Drawing 1982-88 updated
4 Oct 2013 Issue 1.60 Updated for networking and 8U cabinet.
5 Nov 2013 Issue 1.70 Sheets 153 and 157 amended.
11 April 2014 Issue 1.80 Sheets 150 amended.
9 March 2015 Issue 1.90 Sheet 143 amended, Sheets 132, 161 to 165 added.
11 Nov 2015 Issue 1.91 Sheet 1982-210 Sheet 2 added.
30 March 2016 Issue 1.92 Sheet 1982-210 Sheet 2 updated.
19 July 2017 Issue 1.93 Sht 166, 167, 168 added.
21 November 2017 Issue 1.94 Shts 133, 134, 135 & 169 added, 115 & 152 updated. 1982-88 updated.
16 October 2018 Issue 1.95 Shts 136, 137 & 138 added, 134, 161, 163 & 169 updated.
8 February 2019 Issue 1.96 Sht 118 updated, 170 added.