LT0442 Issue 1.96 8 February 2019 Page iii
Each of these diagrams (most in the 1982-71 series) shows the wiring for a particular module, card or base
which can be used with the MX1-Au fire alarm system.
D51MX Duct Sampling Unit (with 4B-C)
DIM800 Detector Interface Module
CIM800 Contact Input Module
SNM800 Sounder Notification Module
RIM800 Relay Interface Module
LPS800 Loop Powered Sounder Module
VLC800MX Vesda LaserCompact Interface
CP820/830 and MCP820/830 Call Point
LIM800 Loop Isolator Module
Intrinsically Safe Devices
VIO800 (MIO800) LaserPlus/Scanner
QMO850 Monitored Output Module
DDM800 Dual Detector Module, Loop Powered
DDM800 Dual Detector Module, Externally Powered
SIO800 Single Input/Output Module
FV400 Series Flame-Proof Detector
FV421i Intrinsically Safe Detector
40020 External Alarm Strobe
ISO8201 Strobe Driver to MX1 Anc 3
16 Way Relay or Open Collector O/Ps
MIM801 Mini Input Module (NZ use)
Single T-Gen 60/120 to 100V Switching Module
T-Gen 60/120 to 100V Splitter Module
High Level Interface (HLI) Module
Dual T-Gen 60/120 to 100V Switching Module
Triple T-Gen 60/120 to 100V Switching Module
T-Gen 60, MX Modules, MX Loop Card
16 Input, 16 Output, MX Loop Card