To begin creating marking programs, please consult the Minilase™ Pro SE
software manual located in the “Manuals” folder located on the included
USB drive. You can quickly run through a basic guide to creating a marking
program to verify system functionality on Page 98 of the software manual.
In addition, software video tutorials are located on the USB drive in a folder
titled “Software Video Tutorials”.
If you purchased a fume extraction system for your Minilase™, remove the
plastic cover over the fume extraction port on the operator left side of the
machine. Insert and attach the fume extraction tube included with the
system. You may now connect your fume extraction hose to the end of the
plastic tube.
To Next Page
Loading...