Tykma ELECTROX Minilase - Installing the USB Drivers; Device Manager Access

Minilase™ e System Guide
7 | P a g e
Installing the USB Drivers
Before installation of the USB drivers, please make sure you have followed
steps 1-4.
Before proceeding with the software installation, you must first install the
drivers to support the USB connection from the PC to the laser.
Step 1: Insert the provided USB drive into an open USB port on your
computer.
Step 2: Open the device manager. You can conduct a search on your PC to
open the device manager if necessary. Expand the “Other devices” section
and you will see “USBLMCV2” listed. Right click on this and choose “Update
Driver”.