TYM T194 - Page 113

G
STANDARD FOR FARMWORK
G
▶ CAUTIONS DURING THE WORK
Do not load anything that can interfere
driving.
• Always keep the driver’s seat clean.
Always buckle up when driving.
Opening radiator cap when heated can
spring out the steam to have the
operator burned.
Open the cap after it is sufficiently
cooled down.
Do not drive with depressing the
differential gear pedal.
Prohibit anyone to get on the machine.
• Prohibit anyone to get on the
machine other than the designated
place.
• Even though there are some
designated place, do not let people
more than capacity get on the
machine.
▶ CHECKUP LIST FOR OPERATION
Before using the machine, check it and
repair if there is a malfunction.
Check engine oil.
• Pull out level gauge, wipe off any fuel
leak, put it back in, and pull it out
again to see if the oil level is between
「upper limit」and「lower limit」.
Before any operation, check for any
foreign materials caught on the engine,
muffler, battery, and the fuel tank.
Remove them immediately.
Covers that are removed during the
maintenance work should be reinstalled
to their original positions.
• Attach the cover correctly and firmly.
Also, put a signal that there is a broken
car, 100m behind and 200m at night in
accordance with Automobile Regulation
Article 23.
When starting to drive, make sure to
check around carefully.
• Do not let anyone such as a child get
close to the machine, keep them
away and then drive the machine.
Do not load flammable, explosive
material (diesel, gasoline , etc) on the
machine.
When getting on and off a truck, have a
helper give you signal and follow his/her
lead.
Refer to chapter A in user’s manual
regarding the decals on the machine.
3