TYM T194 - Safety Tips During Maintenance; Safe Maintenance Practices; Refueling and Cooling System Safety

GENERAL INFORMATION
A
12
To select seat position, move adjusting
lever and slide seat closer to or away
from dash panel and controls.
▶ SEAT SLIDING
Before operating a tractor it is
important to adjust the seat to the most
comfortable position & check whether it
is properly locked in its position.
7. SEAT ADJUSTMENT
 Do not use solvents to clean the seat.
Use warm water with a little detergent
added.
IMPORTANT
 Do not put a hand between the seat and
the slides when adjusting the seat
position.
You can get injured unexpectedly.
WARNING
 Check whether the seat properly locked
in its position before driving the tractor.
 Always use the seat belt when the ROPS
is installed.
 Do not use the seat belt if a foldable
ROPS is down or there is no ROPS.
Check the seat belt regularly and
replace if frayed or damaged.
DANGER
SEAT SLIDING ADJUSTMENT LEVER