TYM T194 Operator's Manual

D
OPERATION
D
▶ GENERAL IMPLEMENT
<Safety precautions for rotavator>
Never remove the safety cover of the
rotavator.
Do not remove the PTO shaft cover and
safety cover on the universal joint.
When adjusting each part, disengage
the PTO and stop the engine in advance.
When driving on a road, keep the PTO
disengaged.
Also, keep the rotavator lowered on a
road as long as it does not hit the
ground.
For the universal joint, its inner shaft
and outer shaft should be overlapped at
least 15cm.
Check that the universal joint is firmly
fixed to the tractor and rotavator shaft.
▶ PRECAUTIONS FOR HANDLING IMPLEMENTS
1. When driving the tractor to attach
or detach an implement, make sure
that there is no one in between or
around the tractor and implement.
2. Install and remove the implement
only on safe and level ground.
3. When installing a heavy implement,
install weight on the front to keep
balance.
4. When adjusting an implement,
apply the parking brake, stop the
engine and set the PTO switch in
the OFF position in advance.
5. To tow anything, use the towing
hitch only.
6. When working with a front loader,
install an implement to the back to
keep balance (if necessary).
9
4. WORK PROCEDURES
 Read instructions on warning decals on
each implement thoroughly before
work.
 To avoid an injury due to mishandling of
an implement, read the user's manual
of the implement thoroughly and work
safely and precisely with caution.
 Installation of an improper implement
can lead to an injury. Install only
implements specified by the
manufacturer.
WARNING

TYM T194 Specifications

General

Brand	TYM
Model	T194
Category	Tractor
Language	English