OPERATION
D
10
1. Sequential returning plowing
pattern
• This pattern can be useful in a well-
planned field in a good condition.
• The border shown in the figure is the
effective plowing width of the
rotavator and should be set a little
narrower than three times of one
plowing width.
• The starting point is the ending point.
• Plow in a sequential pattern from (1)
to (6) and in a circular pattern from
(7) to (18).
• When driving forward to plow, have
the bank on the right side.
• Be careful not to press already
plowed soil with the wheels.