(2) Changing
① Unscrew the drain plug on the
lower section of the transmission
to drain contaminated transmis-
sion fluid. Since hot fluid flows
out of the engine rst, be careful
not to get burnt.
② After draining fluid, tighten the
transmission uid drain plug.
③ Add the specified amount of
the specified transmission fluid
through the ller hole.
If transmission fluid gets on
your skin, it can irritate the skin
and cause a skin condition.
Make sure to clean your skin
with soap and water or hand
cleaner thoroughly.
•
CAUTION
(3) Oil specification
THF 80W
(API GL-4 Grade, Gear Oil 80W)
Do not add uid over the upper
limit level.
Check the uid before starting
the engine or at least in 5 min-
utes after the engine is stopped.
When trying to use new fluid
from a different manufacturer
or fluid with different viscosity,
drain used fluid completely be-
fore adding new uid.
•
•
•
NOTE
T39O508A
Upper
limit
Lower
limit
Drain plug
T19O507A
To Next Page
Loading...
