5. InStructIon after uSe
When the work is completed, stop the engine on a
leveled ground, check the machine to clean. (remove
any foreign materials)
- Remove straws, dirt, etc and clean around the en
-
gine, silencer, and fuel tank.
Lay a cover on the transplanter (equipment) after the
mufer and engine cool down.
Get a regular inspection after the season is over.
- When discarding a part (battery, oil, etc) or scrap a
machine, consult to a dealer and proceed accordingly.
For long-term storage, remove the battery from the
machine and store it or disconnect the negative battery
cable.
6. cautIonS for InSpectIon and
maIntenance
Do not refuel either when the engine is still hot or
while driving.
Measures against a re: Every working place with a
risk of re should be provided with a re extinguisher.
Prevent a re by taking measures such as making a
smoking area.
Always wipe off the leaked fuel.
Be seated in the cab when starting the engine.
After refueling, tighten the fuel cap and check if there
is any fuel leakage from tank or pipe.
When opening a cap to supply water to radiator, be
careful because steam or boiling water may spray due
to overheating.
When getting off the cab, turn off the engine, lock the
parking brake and remove the ignition key.
If it is inevitable to park on a slope, choke the wheels.
Park on a leveled and safe ground safely.
Check if the wiring code is in contact with other parts,
peeled, loose or having spacing.