④
Run the engine for approx. 5
minutes and check for proper
operation through the engine oil
warning lamp. Then, stop the
engine.
(This warning lamp should be
turned off while the engine is
running.)
⑤
Check the oil level with the dip-
stick again. If still insufficient,
add more.
REPLACING ENGINE OIL
FILTER CARTRIDGE
① Remove the engine oil lter car
-
tridge by turning it counterclock-
wise with a lter wrench.
② Apply a thin film of oil to the
O-ring of a new cartridge and
in st al l t he n ew c artridge by
tightening it with a hand. When
its packing touches the sealing
surface, turn it approx. 2/3 turns
further with a wrench.
③ Add engine oil to the specified
level.
►
T39O512A
pliers
Engine oil
gauge
Engine oil
Filter Cartridge
T19O511A
To Next Page
Loading...
