1. At least on a daily basis check all
oil levels. Water level in the radia-
tor and electrolyte level in the bat-
tery and perform services accord-
ing to the service schedule.
2. Ensure tire pressure are even
and the correct pressure for the
job being done is maintained.
3. Check to ensure that the all con-
trols and preventative mecha-
nisms of the Ride on lawnmower
and implement work correctly and
effectively.
4. Ensure that an adequate set of
the correct tools is available for
maintenance and minor repairs.
5. Ensure that all service work and
repairs are carried out on a flat
area with a concrete or similar
oor.
SAFETY TIPS DURING MAINTENANCE
Do not carry out service work
on a Ride on lawnmower un-
til it is switched off, and the park-
ing brake applied and wheels
choked.
Where a Ride on lawnmower is
started in a confined area, en-
sure that the area is well venti-
lated as exhaust gases are very
harmful, and can cause death.
6. Do not work under raised imple
-
ments.
7. When changing wheels or tires
ensure that a suitable wheel
stand is placed under the axle
prior to removing the wheel and
the wheels are chocked.
8. Where guards or shields need to
be removed to perform a service
or repair, ensure that the guard
or shield is correctly reinstalled
before starting the Ride on lawn-
mower.
9. Never refuel near a naked ame
or with an overheated engine.
Ensure to turn off Engine before
refueling.
10. The cooling system operates un
-
der pressure, take care when re-
moving the radiator cap on a hot
engine to prevent being scald-
ed by steam or hot water. Do not
add water in the radiator when
the engine is hot. Add water to
the radiator only after the engine
cools down completely.
11. To prevent fires keep the Ride
on lawnmower including the en-
gine clean and free from inam-
mable material and well away
from fuels and other inammable
material.
To Next Page
Loading...
Need help?
General
