HAZARD FLASHER SWITCH
This switch can be used to warn
other vehicles when malfunction
occurs in the Ride on lawnmower
while driving on a public road. When
pressing the switch once, the left
and right hazard warning lamps
blink. Pressing the switch again
turns off the lamps.
►
Hazard flasher switch
(2) Turn signal lamp operation
The turn signal lamps can be op-
erated with the main switch in the
"ON" position.
This lever is not automatically
returned to the neutral position.
Therefore, set it back to the
neutral position after turn.
•
NOTE
Left turn
Turn the turn signal switch counter-
clockwise. Then, the left turn signal
lamp and the left turn signal indica-
tor on the instrument cluster blink.
Right turn
Push the turn signal switch clock-
wise. Then, the right turn signal
lamp and the right turn signal indi-
cator on the instrument cluster blink.
•
•
T19O114A
To Next Page
Loading...
