IMPORTANT
Never use petrol, thinners or any other similar flammable material to clean the fuel filter.
■ Changing the Oils in Tractor
Always use quality oils for engine or transmission oil.
Refer to the table on pages 4-3 for the change frequency.
■ Changing Engine Oil
Park tractor on a level surface, shut-off the engine and Remove
the sump plug & drain oil. Replace and check the sump plug and
refill the engine with oil to the correct level on the dipstick (approx.
2.7 ℓ (0.71 US gal)).
The grade of oil to be used will depend on the ambient
temperature.
The tractor is shipped from the factory with 10W-30.
IMPORTANT
When changing the oil, always change the filter.
Always use the same oil, as using different oils or specifications can cause damage. The drained oil should
be disposed of according to local regulations.
MAINTENANCE AND SERVICE
5-11
Engine Oil
Gauge
Engine Oil Filter
Engine Oil Filler
5
To Next Page
