3
3-7
DESCRIPTION OF OPERATING SYSTEM
INDEPENDENT PTO
■ PTO Lamp
PTO lamp indicates the state of the PTO shaft.
1. If the lamp glows: The PTO is On.
2. If the lamp is off: The PTO is off.
The PTO shaft will not rotate if switch is in OFF position.
■ PTO Switch
PTO ON/OFF switch is situated on the right hand side on the instrument
panel and can be identified easily with its built in green colored indicator.
When the switch is pushed down to start the PTO indicator glows to indicate
that the switch and the PTO are in ON position.
If the switch is pushed down again the indicator goes off signaling that the
PTO is OFF.
PTO Lamp
PTO Switch
To Next Page
Loading...
Need help?
General
