3
3-13
■ Rear PTO
The tractor has one speed of rear PTO. Use the PTO lever to engage.
The PTO switch must be OFF before PTO is engaged.
1. Decrease engine speed to near idle.
2. Make sure that PTO switch is OFF.
3. Engage rear PTO using the PTO lever.
4. Turn on the PTO switch.
5. Increase engine speed to desired speed.
Both of the rear and mid PTO are provided for variable utility.
They can be engaged simultaneously or separately at same time.
The engine will not start if PTO switch is ON position.
CAUTION
To avoid damage of transmission and implement, do not engage PTO with the engine running at high speed.
2. PTO (Power Take Off)
REAR PTO speed
540RPM
DESCRIPTION OF OPERATING SYSTEM
Mid Mid & Rear Rear
PTO Safety Cover
To Next Page
Loading...
Need help?
General
