3-14
■ Mid PTO (OPTION)
The tractor has one speed of mid PTO. Use the PTO lever to engage.
The PTO switch must be OFF before PTO is engaged.
1. Decrease engine speed to near idle.
2. Make sure that PTO switch is OFF.
3. Engage mid PTO using the PTO lever.
4. If rear PTO is needed to engage, shift the PTO lever to correct
position.
5. Turn on the PTO switch.
6. Increase engine speed to desired speed.
CAUTION
Do not operate any implement at a high speed than is specified for it.
When making adjustments to the implement stop the engine to avoid serious injury.
When leaving the tractor stop the engine, and remove the key.
Set the parking brake.
MID PTO Speed
2,000 RPM
DESCRIPTION OF OPERATING SYSTEM
Mid
Mid + Rear
Rear
Mid PTO
Safety Cover
To Next Page
Loading...
Need help?
General
