To avoid problems, it is recommended that a range of checks be carried out daily before starting the tractor. For details of the
items and period, please refer to the maintenance table.
1. Check all shields and guards. Be sure them are in place.
2. Check the engine coolant level. Add if required.
3. Check the engine oil level. Add if required.
4. Check the transmission oil level. Add if required.
5. Check the tire pressure. Adjust if required.
6. Check the fuel level with key switch ON position. Refuel if required.
7. Check the operation of all gauges, switches, lights, indicators and horn.
8. Check the brake pedals. Adjust if required.
9. Check the speed control pedals.
10. Check the seat belt and ROPS.
CAUTION
To avoid injury, always ensure that the tractor is on level place with the engine stop and the parking brake is
engaged before check.
1. PRE-OPERATION CHECK
OPERATION
4-2
■ Adjusting Operator Seat
It is important to adjust the seat to the most comfortable position before operation.
① Lift the adjust lever at the front of the seat.
② Slide the seat forward or backward to desired position.
③ Release the lever. Then the seat will lock automatically in position.
Seat Adjusting Lever
To Next Page
Loading...
Need help?
General
