TOWING WITH THE ENGINE RUNNING
Towing with the engine running can be performed if forced gearbox lubrication is ensured:
• Engine speed between 1,200 ~ 1,300 rpm.
• Maximum towing speed 5 mile/h.
• Maximum towing distance 0.62 mile.
For towing the tractor use only a standard bar applied to the front towing hitch approved by the manufacturer.
Make sure to use the correct pin for the towing hitch and that it is secured with its locking pin.
Clean all lights required for road use, front and rear, and make sure they are in working order
Before starting towing check the following conditions:
• Unhitch any implement from the tractor;
• Lock the two brake pedals together with the connecting latch;
- Disengage the power take-off and differential locks;
- Set the shuttle control lever and gear lever to neutral;
- Move the range lever to the "fast“ position;
• Move the creeper lever to neutral;
• Display the SMV (Slow Moving Vehicle) sign and turn on the rotating beacon and hazard lights
DANGER
Switch on the hazard warning lights and revolving warning lights.
Affix suitable notices indicating that the tractor is being towed.
Observe and follow the relevant national regulations.
Observe local safety regulations.
MAINTENANCE AND SERVICE
5-29
5
To Next Page
Loading...
Need help?
General
