E
MAINTENANCE
E
4. Sit on the driver's seat, turn the
main switch to the 「ON」 position
and check:
• Fuel gauge for proper operation
• Fuel level
• Engine oi l and charge warning
lamps for blinking operation
• Turn signal lamp
• Horn operation
• Brake pedal free play
5. Start the engine, drive the tractor
slowly and check:
• Emission color
• Brake pedal operation
• One brake pedal operation
• Steering wheel for heaviness and
vibration
• Coolant gauge operation
• Hydraulic operation of 3-point link
▶ INSPECTION ITEMS
To prevent any possible failure, some
items should be checked daily.
Make sure to perform inspection before
driving.
Inspect each part in the following order:
1. Check the items that were faulty
yesterday.
2. Go around the tractor and check:
• Lamps for proper illumination and
damage
• Tires for inflation pressure, crack,
damage and wear
• Rotating parts for loose bolts and
nuts
• Transmission fluid level
• Implement attachment status
3. Open the hood and check:
• Engine oil level
• Coolant level
• Fan belt for looseness and damage
5
3. CHECKS & SERVICING EACH PART
To Next Page
Loading...
