Warning
After finishing the work, always lower the implement to the ground and switch
off the engine, Set the parking brake to avoid injuries and accidents .
▶Lowering speed control knob for the 3 point hitch
This knob controls the downward speed of the
Draft control lever
▶ Soil engaging implements can be set for precision
work by using draft control. By mounting the
lever forward. The depth increase & by moving
the lever backwards the depth increases.
Adjusting Knob of hydraulic
descent speed
41
This knob controls the downward speed of the
hydraulics three point linkage and is positioned at the
front of the driver’s seat.
To slow the downward speed- Turn the knob clockwise.
To increase the downward speed, turn the knob anticlockwise.
To lock the knob clockwise.
Do not over tighten the knob.
Always set the knob to lock when
1.Traveling on the road
2.Replacing tires or blades on an implement.
3.Making adjustments to an implement. Sudden dropping of an implement due
to hydraulic problems can cause serious injury or death.
Caution
To Next Page
Loading...
