After finishing the work, always lower the implement to the ground and switch off the
engine, Set the parking brake to avoid injuries and accidents .
Warning
▶Lowering speed control knob for the 3 point hitch
This knob controls the downward speed of the
hydraulics three point linkage and is positioned at the
front of the driver’s seat.
To slow the downward speed- Turn the knob clockwise.
Adjusting Knob of hydraulic descent speed
To increase the downward speed, turn the knob anticlockwise.
To lock the knob clockwise.
Do not over tighten the knob.
Always set the knob to lock when
1.Trave
ng on t
e roa
2.Replacing tires or blades on an implement.
3.Making adjustments to an implement. Sudden dropping of an implement due to
hydraulic problems can cause serious injury or death.
Caution
External implement hitching control switch
The external switch for the 3 point hitch can be
used to
raise or lower the hitch from outside the tractor.
This can be useful for making small adjustments
when
connecting implements to the 3 point hitch.
Always operate the remote switches according
to the
following procedure.
STEP 1: move the
FORWARD/NEUTRAL/REVERSE Lever to the
NEUTRAL position engage the park Brake
45
,
.
STEP 2: to raise the hitch.
to lower the hitch.
Using external control
Stand well clear of the rear linkage and implements
when using the hitch remote switches or injury can
result from moving parts.
To Next Page
Loading...
