TYM T700 - Tractor Driving and Operation; Starting the Engine Procedures; Electronic System Self-Check

Self check system
This system is used to check each electronic function individually.
Operating the tractor with check system.
1) Sit on the driver’s seat
2) Apply the hand(foot)brake
3) Put the main and sub shift lever in neutral
4) Insert the ignition key and turn in ON position
5) Switch to OFF all the switches in controller
6) Push the external switch ON.
7) Lower the implement with external button switch
8) Push the external button switch OFF
9) If it beeps, Control it with the Position control knob till it doesn’t sound.
Electronic controller
Self check system
1) Raise SOL
2) Lower SOL
3) Reverse control
4) Turning control
5) Position control
6) Lift arm sensor
7) Load sensor
52