4. It is normal for the tire pressure monitor to measure the tire pressure with a
certain degree of accuracy. (If you find that its measurement result is different from
your tire pressure gauge).
Please use the system correctly. Distributors are not liable for damages caused
by misuse.
11.Get Help
We advise you to test the sensor firstly.
You could take off the sensor from your tire to see if the machine alarms.
1) If the monitor begins to beep, it means your sensor is in normal operation. So
you could try to re-install the sensor again.
If it still does not work, maybe the sensor is lack of battery power.
You could try another battery again. And here we would like to provide a
change-battery video to help you.
The video link: https://youtu.be/JXc0sVjN19Y
2)Or if it does not alarm, it also may mean that your sensor is lack of battery power.
You could try another new battery
again.
The battery-change video is mentioned above, and you could refer to it.
data display.
3. It is normal for the sensor to be worn and corroded by the external environment. We
recommend that you buy extra sensors as backup. Then when the sensor is abnormal,
you can try to solve the problem according to the following instructions. If the problem is
still not solved, you can contact us for after-sales service to get the replacement sensor.
--- IF THE SENSOR IS NOT WORKING ---
To Next Page
Loading...
Need help?
General
