Tymate M7-3 - Alert Conditions; General Alarm Operation; Turning Off Alarms; High Pressure Alert Example

e. g. While the front left tire pressure is 45PSI, the monitor will make a sound "beep",
and the red LED will flash.
e. g. While the front left tire pressure is 28PSI, the monitor will make a sound "beep",
and the red LED will flash.
1) Handle the abnormal situation of the tire in time.
2) Long press the"SET"button, the alarm will stop and enter the setting page. Long
press the"SET"button again, the machine will exit the setting page, and the alert
will not sound for the time being.
3) Press the"Power ON/OFF" button and the alarm will disappear.
Eg. Factory default
6. Alert Condition
High Pressure Alert/ Low Pressure Alert/ High Temperature Alert/ Fast Leakage Alert
/ Low Voltage Alert of Sensor Battery
alert
alert
alert