Shift+Cursor
Function:
Select the text
Move the cursor to
the upper corner
Function:
Enter the control
center
INSTALLATION AND REMOVAL
Installation:
Move the cursor to the
bottom of the screen
Function:
Get access to the
dock to switch
1.
Align the lower edge of the iPad with the keyboard case.
2.
Slightly push the iPad until all of the edges align.
3.
Press the upper corner of the iPad with your fingers to put it in place.
4.
Repeat pressing the remaining corners until iPad is held tightly inside the case.
Removal:
1.
Hold iPad on both sides of the upper corner and use thumbs to gently push off the back
cover. It's held in place by two tabs.
2.
Repeat for the second upper corner.
3.
Peel away the upper part completely.
4.
Pull
up to remove iPad from case.
To Next Page
Loading...
