If Bluetooth pairing fails, please try the following steps:
1.
Remove all Bluetooth devices on your iPad;
2.
Switch off the Bluetooth function on your iPad;
3.
Reboot the iPad;
4.
Turn on the Bluetooth on your iPad;
5.
Switch the keyboard off and on;
6.
Repeat the steps described on page 2 and 3 to pair the keyboard.
PRODUCT SPECS
Operating distance:
10 meters (33 feet)
Modulation System:
GFSK
Working voltage:
3.0- 4.2V
Working current:
0.88-3.85m A
Sleeping current: < 125µA
Charging current:
500-S00mA
Continuous working
time without backlight:
60 hours
Charging time: < 2 hours
Charging voltage:
5V
Key's life span: >
5 million strokes
Operating temperature: -10 ±55°C
Maintenance:
Please preserve the
keyboard under normal temperature
and recharge under normal voltage.
COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authori-
ty to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to he following two
conditions:
1)
this device may not cause harmful interference, and
2)
this device must accept any interference received, including interference that may cause undes
3)
ired operation.
To Next Page
Loading...