TypeS AC532806 - Charging the Jump Starter

7
NOTE: Fully charge the Jump Starter upon receipt. Check battery status periodically and recharge every
2-3 months and after every use to maintain the efciency and to prolong the life of the internal battery.
CHARGING THE JUMP STARTER:
At home:
Micro USB Cable
1. Plug bundled Micro USB Charging Cable into a
USB-A port on a 2A USB wall adapter (not included).
2. Connect the Micro USB Charging Cable into the
Micro USB Charge Input Port on the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged.
Store the Jump Starter in a safe place when not in use.
USB-A to USB-C Cable /USB-C to USB-C Cable
(cables not included)
1. Plug one end of USB-C Charging Cable into a
USB-A / USB-C port on a 18W (or above) wall adapter
(not included).
2. Connect the other end of USB-C Charging Cable into the
USB-C Charging Input Port on the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged. Store the Jump Starter in a
safe place when not in use.
In Car:
1. Plug bundled Micro USB Charging Cable into bundled 12V USB Charger then
connect it to 12V socket in vehicle.
2. Connect the Micro USB Charging Cable into the Micro USB
Charge Input Port on the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged.
Store the Jump Starter in a safe place when not in use.
NOTE: In order to reduce the risk of re or electric shock, an adapter
shallbe chosen that is suitable for the application and is certied as a
Class 2 or LPS power supply or power adapter.