EasyManua.ls Logo

TypeS PROJUMP 18000 - User Manual

TypeS PROJUMP 18000
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WP ITM. AC530017
User Manual
BC
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
PROJUMP 18000

Table of Contents

Questions and Answers

  • S
    Sandra ValentineJul 30, 2025
    What to do if my TypeS Remote Starter cannot jump start?
    • K
      Katelyn SchneiderJul 30, 2025
      If your TypeS Remote Starter fails to jump start, first ensure the red jumper cable is clamped to the positive (+) post and the black cable to the negative (-) post or car interior. A bad clamp connection can prevent jump starting. Also, if the 90-second timer has expired, disconnect and reconnect the cables. Finally, check the battery status and recharge via USB if it's low (below 50%).
  • B
    Brandon HamiltonAug 7, 2025
    Why doesn't the flashlight or lantern turn on on my TypeS Remote Starter?
    • S
      Susan WoodAug 8, 2025
      If the flashlight or lantern on your TypeS Remote Starter does not turn on, it could be due to a low battery. Recharge the unit using the provided 120V AC/DC adapter or a USB cable. As a safety feature, the light will not function while the unit is charging. Unplug the unit or wait until charging is complete before attempting to use the light.
  • J
    Jennifer SmithAug 19, 2025
    What does it mean if the LED light on the clamp box of my TypeS Remote Starter keeps flashing?
    • W
      william34Aug 19, 2025
      If the LED light on the clamp box of your TypeS Remote Starter is flashing, it indicates that the protection circuit is active.

Summary

Technical Specifications

Jump Start Current

Maximum current for jump starting vehicles.

Operating and Storage Temperatures

Housing Protection Rating

Feature Overview

Jumper Cables Port

Safety Protection Features

Features for correct clamp connection and battery protection.

Jumper Cable Clamps

Red positive and black negative clamps for battery connection.

Polarity Protection Indicator

Box on cables with indicator lights for protection status.

Safety Warnings and Precautions

General Safety Instructions

Essential precautions for safe operation to prevent injury or damage.

General Operating Precautions

Basic safety precautions to follow when using the product.

Risk of Explosive Gases

Warnings and precautions when working near lead-acid batteries.

Storage and Environmental Safety

Personal Protective Measures

Safety measures for personal protection when working with batteries.

Battery Handling and Heat Precautions

Precautions for personal protection and safe handling of batteries and the unit.

Charging and Operation Environment

Servicing, Connections, and Limitations

Vehicle Compatibility Warning

Specifies the types of vehicles the jump starter is intended for.

Product Usage and Charging

Checking Power Level

Charging Mobile Devices

Charging the PROJUMP 18000

Procedures for charging the PROJUMP via AC adapter, Micro USB, or USB-C.

Charging the PROJUMP In Car

Procedure for charging the PROJUMP using a 12V car charger.

Jump Starting a Vehicle

Pre-Jump Start Safety Checks

Essential checks before attempting to jump start a vehicle.

Intelli-Step Display Guidance

Connecting Jumper Cables to Unit

Steps for powering on the unit and connecting jumper cables to the PROJUMP.

Connecting Clamps to Vehicle Battery

Steps for connecting the RED and BLACK clamps to the vehicle battery terminals.

Polarity Protection Status Check

Checking the LED status on the protection box for correct connection.

Initiating Vehicle Ignition

Instructions for starting the vehicle after connecting the clamps.

Engine Start and Disconnection

Post-Jump Start Engine Operation

Polarity Protection Status Interpretation

Interpreting LCD Screen Messages

TypeS PROJUMP 18000 Specifications

General IconGeneral
BrandTypeS
ModelPROJUMP 18000
CategoryRemote Starter
LanguageEnglish

Related product manuals