TypeS PROJUMP 18000 User Manual

7
NOTE: Fully charge the PROJUMP upon receipt. Check battery status periodically and recharge every 2-3
months and after every use to maintain the efciency and to prolong the life of the internal battery.
CHARGING THE PROJUMP 18000:
At home:
110-120V AC Adapter
1. Plug bundled 110-120V AC adapter into wall socket.
2. Connect the DC jack of the AC adapter into the DC
charge input port on the PROJUMP.
3. Disconnect the PROJUMP when it is fully charged.
Store the PROJUMP in a safe place when not in use.
NOTE: In order to reduce the risk of re or electric shock, only use
the AC adapter as provided by manufacturer.
Micro USB Cable
1. Plug bundled Micro USB Charging Cable into a
USB-A port on a computer or 2A USB wall adapter
(not included).
2. Connect the Micro USB Charging Cable into the
Micro USB Charge Input Port on the PROJUMP.
3. Disconnect the PROJUMP when it is fully charged.
Store the PROJUMP in a safe place when not in use.
USB-C to USB-C Cable (not included)
1. Plug one end of USB-C Charging Cable into a USB-C
port on a 30W (or above) USB-C wall adapter (not
included).
2. Connect the other end of USB-C Charging Cable into
the USB-C Charging Input Port on the PROJUMP.
3. Disconnect the PROJUMP when it is fully charged.
Store the PROJUMP in a safe place when not in use.
In Car:
1. Plug bundled Micro USB Charging Cable into bundled
12V USB Charger then connect it to 12V socket in vehicle.
2. Connect the Micro USB Charging Cable into the Micro
USB Charge Input Port on the PROJUMP.
3. Disconnect the PROJUMP when it is fully charged.
Store the PROJUMP in a safe place when not in use.
AC DC

TypeS PROJUMP 18000 Specifications

General

Brand	TypeS
Model	PROJUMP 18000
Category	Remote Starter
Language	English