TypeS PROJUMP 18000 User Manual

Issue Cause Remedy
Cannot jump start Wrong clamp
connection
Make sure to clamp the RED jumper
cable to the POSITIVE (+) post on
the car battery. And BLACK jumper
cable to NEGATIVE (-) post or car
interior. Refer to Page 8 for details.
90-Second timer
to jump start has
expired.
PROJUMP timed out. Disconnect the
cables from the vehicle battery and
reconnect.
Low battery status Recharge the unit via USB cable until
at least 50% charge.
LED light on the
clamp box keeps
ashing
Protection circuit
is working
Refer to the status table on the
indicator box or page 11 of the
manual.
Flashlight or
lantern does not
turn on
Low battery Recharge the unit by bundled 120V
AC/DC adapter or via USB cable.
The unit is
charging
As a safety precaution, the
ashlight or lantern will not work
while the unit is charging. Please
unplug the unit from charging or
wait until the unit nishes charging
before using the light.
TROUBLESHOOTING:
A Horizon Brands Company
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626
Mon - Fri, 8AM - 5PM (Pacic Time)
Tel: 1-866-294-9244 (English only)
| info@typesauto.com
©2021 TYPE S. All rights reserved.
www.typesauto.com
Made in China
ML-530017_V1

TypeS PROJUMP 18000 Specifications

General

Brand	TypeS
Model	PROJUMP 18000
Category	Remote Starter
Language	English