EasyManuals Logo

TypeS BT56208 User Manual

TypeS BT56208
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
3
1. Frequency: 2.4GHz
2. Operating Voltage: Monitor DC 12V/24V. License Plate Backup Camera DC 5V
3. Operating Temperature: -20~+50°C
4. Maximum Signal Range: 30 feet/10Metres
(without Interference or Obstruction)
5. Camera Water Resistance: IP65 rating
DASH MONITOR INSTALLATION
1. Stick the Suction Cup Mount on the windshield and adjust to your desired position.
2. Magnetic the Dash Monitor on to the windshield mount.
3. Remove the Type S Dash Monitor protective overlay.
4. Now power the monitor:
Take the 12V/24V Power Adapter and plug adapter into the right side of the TypeS Dash Monitor.
Plug the other end into 12V/24V power port in your car.
5. At this time, the Type S Dash Monitor is ready to be powered on by motion trigger when you
wave your hand in front of monitor or press the wakeup button on the top left of monitor.
Warning: Many vehicles provide constant power to the 12V outlet. If your outlet provides constant
power, please remember to unplug the monitor when not in use to avoid draining the vehicle
battery.
3. PRODUCT SPECIFICATIONS
4. INSTALLATION GUIDE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TypeS BT56208 and is the answer not in the manual?

TypeS BT56208 Specifications

General IconGeneral
BrandTypeS
ModelBT56208
CategoryAutomobile Accessories
LanguageEnglish