TYPHOON 4000 - Shutting Down Your Washer; How to Shut Down Your Pressure Blaster

22 |
SHUTTING DOWN YOUR WASHER
Contactwithmuferareacanresultinserious
burns.
Exhaust heat/gases can ignite combustibles,
structuresordamagefueltankcausingare.
• DO NOT touch hot parts and AVOID hot exhaust gases.
• Allow equipment to cool before touching.
• Keep at least 5 feet (1.5 m) of clearance on all sides of pressure
washer including overhead.
How to Shut Down Your Pressure Blaster
1. Release spray gun trigger and let engine idle down.
2. Turn the engine switch to the OFF position.
• Rotate key counterclockwise to the ‘off’ position.
• Rotate the fuel valve to the ‘closed’ position for storage
maintenance or transportation.
• Disconnect battery for storage or maintenance.
3. ALWAYS point spray gun in a safe direction, squeeze spray gun
trigger to release retained high water pressure.
IMPORTANT: Spray gun traps high water pressure, even when engine
is stopped and water is disconnected. Couplings will not release if
under pressure.