24
|
USING BLACK SOAP NOZZLE
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
possible amputation.
• NEVER exchange spray tips without the trigger safety lock
engaged on the spray gun.
• DO NOT twist spray tips while spraying.
Follow these instructions to change spray tips:
1. Pull back collar on quick–connect and pull current spray tip off.
Store spray tips in holder provided on the handle. Storing
nozzles in the designated holder will help prevent debris
clogging the tip.
2. Select desired spray tip:
• For gentle rinse, select white 40° spray tip.
• For general purpose or large surface select green 25° spray tip.
• To scour surface, select yellow 15° or red 0° spray tip.
• To apply detergent, select black spray tip.
3. Pull back on collar, insert new spray tip and release collar. Tug on
spray tip to make sure it is securely in place.
Usage Tips
• For most effective cleaning, keep spray tip from 8 to 24 inches
away from cleaning surface.
• If you get spray tip too close, especially using a high pressure
spray tip, you may damage surface being cleaned.
To Next Page
Loading...