4
|
INTRODUCTION
Using the Operator’s manual
The operating manual is an important part of your pressure blaster
and should be read thoroughly before initial use, and referred to
often to make sure adequate safety and service concerns are being
addressed. Reading the owner’s manual thoroughly will help avoid any
personal injury or damage to your machine. The information in this
manual will offer you the most effective tools for cleaning as well as
the safest. By knowing how best to operate this machine you will be
better positioned to show others who may also operate the unit. This
manual contains information for the complete range of be pressure
blasters, and is placed in order starting from the safety requirements
to the operating functions of your machine. You can refer back to
themanualatanytimetohelptroubleshootanyspecicoperating
functions, so store it with the machine at all times.
Notice
Actual pressure released at the point of discharge may vary by
machine due to varying factors including: Volume of water being fed to
the machine by the water source, the inclusion of a Chemical injector
in the line, or variations in Engine performance
Attention: Read through the
complete manual prior to the initial
use of your pressure blaster.
To Next Page
Loading...