u-blox LEA-6 Series User Manual

LEA-5, NEO-5, TIM-5H - Hardware Integration Manual
GPS.G5-MS5-09027-A2 Released Handling and soldering
Page 55 of 68
3.3.11 Grounding metal covers
Attempts to improve grounding by soldering ground cables, wick or other forms of metal strips directly onto the
EMI covers is done at the customer's‖own risk. The numerous ground pins should be sufficient to provide
optimum immunity to interferences and noise.
u-blox makes no warranty for damages to the u-blox 5 module caused by soldering metal cables or any
other forms of metal strips directly onto the EMI covers.
3.3.12 Use of ultrasonic processes
Some components on the u-blox 5 module are sensitive to Ultrasonic Waves. Use of any Ultrasonic Processes
(cleaning, welding etc.) may cause damage to the GPS Receiver.
u-blox offers no warranty against damages to the u-blox 5 module caused by any Ultrasonic Processes.

u-blox LEA-6 Series Specifications

General

Brand	u-blox
Model	LEA-6 Series
Category	GPS
Language	English