SARA-G3 series - System Integration Manual
UBX-13000995 - R06 Objective Specification Approvals
Page 179 of 218
The PICS document of the application device integrating a SARA-G3 module must be updated from
the module PICS statement if any feature stated as supported by the module in its PICS document
is not implemented or disabled in the application device, as for the following cases:
o if any RF band is disabled by AT+UBANDSEL command
o if the automatic network attach is disabled by AT+COPS command
o if the module’s GPRS multi-slot class is changed by AT+UCLASS command
To Next Page
Loading...