SARA-G3 series - System Integration Manual
UBX-13000995 - R06 Objective Specification System description
Page 77 of 218
On all such carriers, no synchronization is possible
The client can configure the number of minimum disturbing carriers and the power level threshold by using
the AT+UCD command [2].
The jamming condition is cleared when any of the above mentioned statements does not hold.
The congestion (i.e. jamming) detection feature can be enabled and configured by the +UCD AT
command (for more details refer to the
u-blox AT Commands Manual
[2]).
To Next Page
Loading...
Need help?
General