ZED-F9P-Integration manual
An L1 + L2 stacked patch antenna must have a good band-pass performance from the patch
elements with low attenuation from SAW band-pass filtering. An example of the measured
frequency characteristics of a low-cost L1 + L2 antenna is shown below.
Figure 65: Low-cost L1/L2 antenna band characteristics
The u-blox low-cost antenna design is shown below, followed by some examples of antennas from
other manufacturers which can be used with ZED-F9P.
UBX-18010802 - R08
Appendix Page 106 of 110
Early production information
To Next Page
Loading...
Need help?
General
