U-Line 3018CLR - Page 64

USER GUIDE
Control Operation - Service 8
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Note: Unit ships in PC link mode.
To alter communication settings
1. Use Down to select the current setting and press
Select .
2. Press Up or Down to change settings.
3. Press Select to confirm.
To exit “USB Port” use Up to select “Return to Menu”
and press Select to confirm.
To access USB Port
1. Use Down to select “USB Port”.
2. Press Select .
Showroom Mode
Showroom displays a number of features and allows the
unit to be powered on without running the cooling system.
To toggle showroom mode
1. Use Down to select “Showroom Mode”.
2. Press Select .
3. Use Down to select “Off” and press Select . “Off”
will begin to flash.
4. Press Up or Down to toggle between off and on.
5. Press Select to confirm.
If set to “on” showroom mode will begin immediately. To
exit showroom mode press and release Power .
To exit the showroom mode menu use Up to select
“Return to Menu” and press Select to confirm.
ID Communication
PC Link PC TTY
Flash USB Flash Drive
USB
Grille
Up
Select
Down
RETURN TO MENU
SHOWROOM MODE
OFF